50 AE 300 grain loads
The new Speer reloading manual (no.14) lists 50 AE loads for a 300 grain bullet using Accurate Arms no.9 as 25.0 grains minimum to 26.0 grains maximum. I want the lightest load that will function...
View ArticleRe: 50 AE 300 grain loads
That is a very small spread for the AA are you sure? Sort of like the word "Sure" seems like it should be different!!! More like "Shur"...454 in aa9 is 22.0/25.8 The bullet DE recommends is the 325 I...
View ArticleRe: 50 AE 300 grain loads
Gabster: I rechecked the figures in the Speer #14 manual. 300 grain bullet. AA no.9. Starting charge....25.0 grains. Maximum charge....26.0 grains. So yes, I'm sure as long as the reloading manual is...
View ArticleRe: 50 AE 300 grain loads
With AA#9: Lyman's 49th lists Hornady's 300XTP at 21.8 - 24.3 using a CCI350 primer. Max velocity 1252. Hornady lists their XTP at 22.7 - 26.2 using a WLP. Max velocity 1400.
View ArticleRe: 50 AE 300 grain loads
pcctex: Sorry I said DE I ment "Lyman #48" book. Only listed the 325... Thanks for the information about all the stuff, folks. GAB
View ArticleRe: 50 AE 300 grain loads
if you want a really light load, i would recommend using titegroup powder. i have seen load data for it somewhere... i just cant find it at the moment. i believe it was something around 12gr of...
View ArticleRe: 50 AE 300 grain loads
Do you guys know what it says for a 300gr projectile - using H110? I think around 33gr load would be ok. The manual I have says 30.5 grains for a 325gr projectile......so I am guessing you could...
View ArticleRe: 50 AE 300 grain loads
I shoot a 300gr Speer GDHP using 34gr of H110 with no problems.
View ArticleRe: 50 AE 300 grain loads
ohiococonut wrote: I shoot a 300gr Speer GDHP using 34gr of H110 with no problems. So is this charge good for all 300 grain projos? I have them in Speer GDHP, Speer TMJ, and Hornady XTP. They are all...
View ArticleRe: 50 AE 300 grain loads
it should function correctly for all of those, but as with any load, you should start at 10% less and work your way up. when trying a new load, i usually start off smaller and work my way up to max at...
View ArticleRe: 50 AE 300 grain loads
MasterJeem wrote: it should function correctly for all of those, but as with any load, you should start at 10% less and work your way up. when trying a new load, i usually start off smaller and work...
View ArticleRe: 50 AE 300 grain loads
wow, thats not a bad deal at all. haha i'll give you $226 for it! cant argue with those profit numbers, right?
View ArticleRe: 50 AE 300 grain loads
i reloaded 250 rds of #9 @ 21.0g and had great action movement!! 300g jacket .
View ArticleRe: 50 AE 300 grain loads
This is what is recommended for powder for the big guys, MJ likes LilGun. So there are quite a few opinions, should be one that will fit well for all. .50 AE, 300 grains - Accurate No. 9, Alliant...
View ArticleRe: 50 AE 300 grain loads
I have an 8lb jug of H110 that I use for 44 mag and will soon be using for both 357 mag and 50 AE.
View ArticleRe: 50 AE 300 grain loads
New to the site, and new to reloading for the .50ae. I'll be reloading on a Lee Classic Turret with their 3 piece die set, no factory crimp. What do you guys suggest as a starting load for 300gr...
View ArticleRe: 50 AE 300 grain loads
Hi, This is a good link to look at, remember H110 and W296 are pretty much the same. http://www.loaddata.com/m...liber%20Reloading%20Data Not sure about no crimp???Need to crimp because of the recoil...
View ArticleRe: 50 AE 300 grain loads
i would highly recommend a good crimp. i tried just a very light crimp and the case mouth would catch on the chamber. just a slightly heavier crimp did the job for me. cant be too heavy, though. was...
View Article